Power Glove Gamepad Adapter

I’ve recently finished a design update to my long line of Power Glove adapters. This time with a housing and Windows 10 support! Check it out!

Power Glove USB Adapter 2

Who knew the world needed another Power Glove USB adapter! Motivated by a housing design I just finished for another project, I decided to make a housing for a PGLink USB adapter (v2). This time the…


I still have some Nintendo Power Glove USB linkboxes if anyone is interested.

PGLink2 boards completed

Just completed building 12 PGLink2 boards for connecting the Nintendo Power Glove to a PC over USB. Also finished some code for use in WorldViz Vizard to use the PG just like in the old Rend386…

PGLink2 board completed

Check out the updated page on my new PGLink2 board. This will allow you to connect a Nintendo Power Glove to a computer over USB. All design files are included.

Power Glove Linkbox USB

Building a new Power Glove Linkbox which doesn’t require mods to the Power glove. It will output data over USB to a virtual COM port.

Added old Power Glove pages

Updated new site with older power glove pages. Power Glove

Power Glove

The Nintendo Power glove is an excellent device to use for low-end virtual reality system. It is a down version of the VPL Dataglove. The glove uses resistive ink bend sensors to relay to the computer…

Modified: Simple Power Glove Interface for IBM PC

Here are the schmetics for wiring the Power glove to the PC. Use +5 volt supply off of the keyboard port. Here are the pinouts on a parallel port and the Nintendo light Gun port.

PowerGlove FAQ

Forward Mattel PowerGlove FAQ version 0.3, [date]. Written by jet@well.sf.ca.us (j. eric townsend). Significant help and input from: Randy Shedden (randysh@microsoft.com), Linda Jacobson (lindaj@well.sf.ca.us),lots of people on the WELL, sci.virtual-worlds, and of course, the glove-list. The…