A complete VFX1 Linkbox Solution!!!

PGLink2 board completed

Check out the updated page on my new PGLink2 board. This will allow you to connect a Nintendo Power Glove to a computer over USB. All design files are included.

Saved a VFX1 today

Saved the life of a VFX1 today. It had a bad LCD and I was able to replace it by bonding a new panel in place. Used the TWSA 20 lenses to get a ~45 degree…

Power Glove Linkbox USB

Building a new Power Glove Linkbox which doesn’t require mods to the Power glove. It will output data over USB to a virtual COM port.

Power Glove

The Nintendo Power glove is an excellent device to use for low-end virtual reality system. It is a down version of the VPL Dataglove. The glove uses resistive ink bend sensors to relay to the computer…

VFX1 VGA Linkbox Plans

Information links at bottom of page. NEW TRACKING LINKBOX INFORMATION!! This page contains a lot of information on the VFX1 and what people call the linkbox. Information at the bottom of the page will show you…

Power Glove Linkbox Plans

The Power glove linkbox is a menelli box reborn. I use an ATMEL ATMega163 with an 8 Mhz crystal and a modified version of the menelli code to poll the glove. All interaction with the glove…